Quantcast best clipper lube?

Sponsors







Author Topic: best clipper lube?  (Read 1412 times)

Offline ska

  • Full Member
  • ***
  • Posts: 106
  • Karma 0
    • View Profile
best clipper lube?
« on: July 05, 2019, 03:11:53 PM »
what is the best clipper lube for small clippers? like the ACG 2s and like a x-block blade? i do not want rust or anything.

Offline Tallcool1

  • County Champion Poster
  • *****
  • Posts: 888
  • Karma 62
    • View Profile
Re: best clipper lube?
« Reply #1 on: July 05, 2019, 05:41:44 PM »
I always used any lubricating type of oil.  WD-40 works as good as anything as long as you have a blower to get all of it off the clippers.  It will break down adhesive in a hurry.

Most people use Final Bloom on show day...because it is laying around anyway.


Offline Chuck Wagon

  • Full Member
  • ***
  • Posts: 106
  • Karma 5
    • View Profile
Re: best clipper lube?
« Reply #2 on: July 09, 2019, 10:57:44 PM »
Synthetic oil is the best.  It has a higher Viscosity Index and the molecules will not break down with higher temps.  All lubricants are derived from crude oil and go through the refining process then are shipped to various lube blender for packaging

I make my own by buying a quart of Pennzoil synthetic motor oil from Wal Mart.  Shell has plant in Qatar that converts Natural Gas to Lube Oil.(google it)  It lasts longer because it does not breakdown with high heat, so it has better friction protection, is not crude based so does not leave a residue.  Its the purest and cleanest oil you can buy.

Offline ska

  • Full Member
  • ***
  • Posts: 106
  • Karma 0
    • View Profile
Re: best clipper lube?
« Reply #3 on: July 11, 2019, 10:29:39 PM »
so just use Pennzoil synthetic motor oil from Wal Mart?

Offline Chuck Wagon

  • Full Member
  • ***
  • Posts: 106
  • Karma 5
    • View Profile
Re: best clipper lube?
« Reply #4 on: July 13, 2019, 09:12:40 AM »
Yes.  $5 to $7 dollars for 32 oz vs $8-$10 for 10oz.  Valvoline has a synthetic oil but is a paraffin, crude oil based, and why I use Pennzoil, which comes from Natural Gas. 

Its very convenient to use a spray, especially when your in a hurry and most clippers like to get moving.  Its not for everybody, but you ask for the best clipper lube and its the best lubrication for friction.  I usually blow the hair out and use a 10 oz squirt bottle (similar to a ketchup bottle with lid you see in diner). 

Again, its easier to grab pink oil, but try it out and its cheap. If I have some, I will also use Rem Oil with Teflon to blend it and thin it out.
« Last Edit: July 13, 2019, 09:18:49 AM by Chuck Wagon »

Offline ska

  • Full Member
  • ***
  • Posts: 106
  • Karma 0
    • View Profile
Re: best clipper lube?
« Reply #5 on: July 13, 2019, 03:32:46 PM »
ok thanks!

Offline DLD

  • County Champion Poster
  • *****
  • Posts: 1527
  • Karma 72
    • View Profile
Re: best clipper lube?
« Reply #6 on: July 15, 2019, 10:06:41 AM »
If you’re going to use anything heavy like motor oil, be very careful to wipe any residue off before you start clipping - the last thing you need is a glob of that heavy oil getting in your calf’s hair, especially if you’re fitting.  The heavier oil is no doubt better for the life of your clipper blades, but mere convenience isn’t the only reason most fitters use final bloom (or something similar).  Whatever you use for lube, get yourself a small soft brush to clean your clippers, and use it regularly - especially when you’re clipping in adhesives.

I like the little bottle of oil that comes with the Andes clippers - I use it when I start and when I stop, but again - being sure to wipe away residue.  But when i’m fitting, especially like a leg, I use a quick shot of final bloom regularly. As long as you don’t overdo it, it won’t break down your adhesive but your blades will cut much better and smoother. Be sure when you spray it on your blades the overspray isn’t hitting the leg.
« Last Edit: July 15, 2019, 10:22:34 AM by DLD »
I know there's a balance
I see it when I swing past...
- John Mellencamp

Offline ska

  • Full Member
  • ***
  • Posts: 106
  • Karma 0
    • View Profile
Re: best clipper lube?
« Reply #7 on: July 17, 2019, 12:40:05 AM »
ok thanks!

Offline newguy

  • Newbie
  • *
  • Posts: 19
  • Karma 0
    • View Profile
Re: best clipper lube?
« Reply #8 on: July 18, 2019, 09:07:51 AM »
I use a oil that is use a cutting oil.Used by machine shops on metal lathes etc.Zoom spout works great and is made for that application.

Offline newguy

  • Newbie
  • *
  • Posts: 19
  • Karma 0
    • View Profile
Re: best clipper lube?
« Reply #9 on: July 18, 2019, 09:12:05 AM »
Here is a picture.it goes a long way and works out cheap.spout fits in the small holes in osler shears.

Offline ska

  • Full Member
  • ***
  • Posts: 106
  • Karma 0
    • View Profile
Re: best clipper lube?
« Reply #10 on: July 18, 2019, 05:29:25 PM »
great! thanks!

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1420 Views
Last post May 16, 2007, 03:38:24 PM
by red
10 Replies
3154 Views
Last post January 29, 2009, 12:15:38 PM
by Throttle
0 Replies
1061 Views
Last post August 06, 2010, 11:40:01 PM
by Sparty-On
4 Replies
1769 Views
Last post October 16, 2010, 10:04:38 PM
by The Show
5 Replies
2431 Views
Last post January 06, 2011, 06:00:58 AM
by 8mile

Powered by EzPortal