7 ft. End Panels?

Help Support Steer Planet:

blackcows

Well-known member
Joined
Jul 6, 2008
Messages
270
Currently I have a few sets of the 8 ft. end panels from Sullivans.  I just purchased a Exiss 7 X 20 Trailer with a 4 ft tack room to use for cattle and horse shows.  I thought about putting hangers on the outside of the trailer to hang end panels but I am somewhat anal and don't want to scratch things up.  Obviously you can't put 8 ft panels across the front of a 7 ft trailer so I am thinking about making some 7 ft end panels that can fit across the front of the tack room flat against the wall.  Anyone think I would miss that 1 ft. of end panel (7 ft. versus the 8 ft.)?
 

boomer

Member
Joined
Oct 4, 2007
Messages
15
We have an Exiss trailer. Dealership said they woulnt hang anything on the outside because it not strong enough. So the sevice department came up with a way for us to pack alot of our cow stuff into the tack room part.  They welded a solid sheet in the corner for strength.  They welded L brackets to the wall. Our sullivan panels go in first ,  then we put 2 blocking chutes in next.  The side bars of the blocking chute slide into the L brackets. D rings were welded in the corners so we could use tie-downs to secure everything. I put some cheap carpet in the tack room for extra protection.  I can always put my saddle rack back in if I need to use it for the horses. Hopefully these pictures come thru so you can see. Hope this helps?
 

Attachments

  • P1010211.jpg
    P1010211.jpg
    115.1 KB · Views: 320
  • P1010212.jpg
    P1010212.jpg
    67.9 KB · Views: 314
  • P1010213.jpg
    P1010213.jpg
    46.1 KB · Views: 326
  • P1010214.jpg
    P1010214.jpg
    43.4 KB · Views: 308
  • P1010215.jpg
    P1010215.jpg
    53.4 KB · Views: 320

blackcows

Well-known member
Joined
Jul 6, 2008
Messages
270
Thanks Boomer...looks like you have a slant, I have a stock combo so I only have a seven foot wall to work with but I do like your setup for hanging fan stands, sign holders, etc.

Mike
 
Top