Wash Rack Ideas - Good and Bad

Help Support Steer Planet:

BTDT

Well-known member
Joined
Jan 26, 2013
Messages
443
I am in the process of designing a wash rack. So I am seeking the "best ideas" for a wash rack, and the things that do not work out.
The rack will be used for approximately 50 head of cattle, and up to 10 "at a time".
What dimensions?
Concrete up how high?
Wood or metal?

I know when I am out and about, I am always encountering things that are very unique and useful and I have also ran into things that just do not work at all even though I am sure "in theory" it was a good idea.

Thank you.

 

HF CHARS

Well-known member
Joined
Jan 5, 2011
Messages
194
Location
South Dakota
neatest idea I have seen that i wish I had done,,catch pen with catch alley leading into rack,  works great when starting to break calves
 

dshack91

New member
Joined
Sep 9, 2013
Messages
2
I have washed many cattle in a washrack that has an alley going into it, wonderful when breaking cattle.
 

frostback

Well-known member
Joined
Feb 7, 2007
Messages
2,068
Location
Colorado
Are you using just one side or both to tie to? Attach the hose behind the cattle if possible and high up.
 

bruiser

Well-known member
Joined
Dec 28, 2009
Messages
198
Location
Illinois (God's country)
Built one for myself a couple years ago. Here's a list of the "if I ever do this again" ideas-
-don't put drain directly under the calf. Let the waste water drain to one corner and the trash will be left on the concrete to be swept up instead of clogging everything up.
-use a hose hanger over the calf (attached to the ceiling).I have a design in my head that is similar to the ones used in a car wash.
-use plenty of slope on the floor. We used an inch in about 4ft of run and its not quite enough
 

Cyfarmer

Well-known member
Joined
Dec 8, 2010
Messages
79
Here is what we did and we love it.
Two tie rails in the front - one high for bigger cattle, one low for smaller.
I went to the local dairy supply company and bought scrap 2" milk line (stainless steel) that I cut into 6-8" lengths. I put those into the concrete 3' from the wall, and 3' apart. My concrete was 6" thick - so the bottom of the pipe was into the fill so water could drain away from the holes. I then took steel pipe in 3ft lengths that would fit tightly into the holes in the floor, and covered them with 2" PVC pipe with caps (the caps are very important if using a blower - air going into the holes spook the calves.) The white PVC keeps from getting rust on the cattle and looks much nicer. My slope is not very steep, and I like it because we can sweep the hair or manure up rather than having it go into the drain. I believe I put in 1" per 8ft. Also - having the water behind,or overhead is excellent so the calves are not constantly stepping or kicking the hose.
Cyfarmer
 

Woodland Farms Show Cattl

Well-known member
Joined
Dec 14, 2011
Messages
163
Location
Deckerville, Michigan
Catch pen or alley is a must, my facilitys were originally a 160 cow freestall barn with a double 4 parlor. we gutted the parlor and filled in the pit to make the wash rack and have our working chute and cow alley around the outside of the wash rack. the alley works amazing for catching the calves before they are broke just by closing a cut gate on each end of the alley. the tie rails are the one side of the alley which I have found works really well because the calves are generally more willing to walk to that rather than right up to a wall to be tied. I also put in removable anti sway posts 30 inches apart and 30 inches back from the rail.

Here is my list of must dos if building a new wash rack:
make it easy for the water and trash to separate
however big you want your wash rack make it bigger. ours is too small now that we have it done.
keep the tie rails away from the wall to keep calves from feeling trapped, that makes a good spot for the catch alley too.
hang hoses from the ceiling. keeps kinks out and keeps it from getting too nasty.
make a separate area for tieing calves to blow them out, moving them helps break them and they aren't standing on the wet cement when blowing them out.

good luck and I would like to see pictures when it is done!  (clapping)
 

paj315

Well-known member
Joined
Aug 15, 2012
Messages
199
Location
Central Indiana
We lined he inside of ours with the plastic they use to line refrigerator trailers it works great and everything can be cleaned with a power washer or a push broom and garden hose
 
Top